Table 82: Features Using TCAM Resource (continued)
TCAM StageFeature/FunctionalityTCAM Apps/TCAM Users
IngressInet family firewall with port-mirror action
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
fw-inet-pm
IngressBridge family ingress firewall on Layer 2 interfacefw-l2-in
IngressMPLS family ingress firewallfw-mpls-in
Pre-ingressFirewall sharing semantics for CLI configured firewallfw-semantics
IngressVPLS family ingress firewall on VPLS interfacefw-vpls-in
Pre-ingressPhysical interface level source MAC filterifd-src-mac-fil
IngressLogical level interface statistics at ingressifl-statistics-in
EgressLogical level interface statistics at egressifl-statistics-out
IngressIngress application on behalf of egress family filter for log and sysloging-out-iff
Pre-ingressIP MAC validationip-mac-val
Pre-ingressIP MAC validation for broadcastip-mac-val-bcast
IngressReverse filters for IPsec service
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
ipsec-reverse-fil
EgressIRB CoS rewriteirb-cos-rw
IngressLink fault management (IEEE 802.3ah) at ingress
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
lfm-802.3ah-in
EgressLink fault management (IEEE 802.3ah) at egresslfm-802.3ah-out
IngressLooback interface inet filterlo0-inet-fil
IngressLooback interface inet6 filterlo0-inet6-fil
IngressStatistics for drops by MAC validate and source MAC filtersmac-drop-cnt
IngressMulticast router port for snoopingmrouter-port-in
Copyright © 2017, Juniper Networks, Inc.1160
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
