To Next Page

To Previous Page

Table 91: jnxSoamLmCfgTable (continued)

DescriptionObject IDObject

Specifies whether the Loss Measurement session is

enabled.

The value 'true' indicates the Loss Measurement session

is enabled and SOAM PDUs are sent and/or

measurements are collected when the session is running

according to the scheduling objects (start time, stop time,

etc.).

The value 'false' indicates the Loss Measurement session

is disabled and SOAM PDUs are not sent and/or

measurements collected.

For a Loss Measurement session to be removed the row

is deleted in order to release internal resources.

This object can be written/modified after row creation

time.

If the LM session is enabled it resumes after

shutdown/restart. If the LM session is disabled the current

Measurement Interval is stopped, if it in process at the

time, and all the in process calculations for the partially

completed Measurement Interval are finalized.

This object does not affect whether the single-ended

Responder is enabled or not, which is enabled or disabled

by the jnxSoamPmMepLmSingleEndedResponder and

jnxSoamPmMepSlmSingleEndedResponder objects.

JnxSoamLmCfgEntry

jnxSoamLmCfgEnabled

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000