Table 91: jnxSoamLmCfgTable (continued)
DescriptionObject IDObject
Specifies the LM data pattern included in a Data TLV when
the size of the LM frame is determined by the
jnxSoamLmFrameSize object and
jnxoamLmTestTlvIncluded is 'false'.
If the frame size object does not define the LM frame size
or jnxSoamLmTestTlvIncluded is 'true' the value of this
object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
JnxSoamLmCfgEntry
9
jnxSoamLmCfgDataPattern
Indicates whether a Test TLV or Data TLV is included when
the size of the LM frame is determined by the
jnxSoamLmFrameSize object.
A value of 'true' indicates that the Test TLV is to be
included. A value of 'false' indicates that the Data TLV is
to be included.
If the frame size object does not define the LM frame size
the value of this object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
JnxSoamLmCfgEntry
10
jnxSoamLmCfgTestTlvIncluded
Specifies the type of test pattern to be sent in the LM
frame Test TLV when the size of LM PDU is determined
by the jnxSoamLmFrameSize object and
jnxSoamLmTestTlvIncluded is 'true'.
If the frame size object does not define the LM frame size
or jnxSoamLmTestTlvIncluded is 'false' the value of this
object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
JnxSoamLmCfgEntry
11
jnxSoamLmCfgTestTlvPattern
Specifies the number of completed Measurement Intervals
to store in the history statistic table
(jnxSoamLmHistoryStatsTable) At least 32 completed
Measurement Intervals need to be stored. 96
Measurement Intervals are recommended to be stored.
This object can only be written at row creation time and
cannot be modified once it has been created.
JnxSoamLmCfgEntry
12
jnxSoamLmCfgNumIntervalsStored
Copyright © 2017, Juniper Networks, Inc.1180
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
