Juniper ACX2000 Configuration Guide

Table 97: jnxSoamDmCurrentStatsTable (continued)
DescriptionObject IDObject
Specifies the length of time for which the
Measurement Interval has been running,
in 0.01 seconds.
jnxSoamDmCurrentStatsEntry 3jnxSoamDmCurrentStatsElapsedTime
Indicates whether the Measurement
Interval has been marked as suspect. The
object is set to false at the start of a
measurement interval. It is set to true
when there is a discontinuity in the
performance measurements during the
Measurement Interval. Conditions for a
discontinuity include, but are not limited
to the following:
1—The local time-of-day clock is adjusted
by at least 10 seconds
2—The conducting of a performance
measurement is halted before the current
Measurement Interval is completed
3—A local test, failure, or reconfiguration
that disrupts service
jnxSoamDmCurrentStatsEntry 4jnxSoamDmCurrentStatsSuspect
Contains the minimum two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
jnxSoamDmCurrentStatsEntry 5jnxSoamDmCurrentStatsFrameDelayTwoWayMin
Contains the maximum two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
jnxSoamDmCurrentStatsEntry 6jnxSoamDmCurrentStatsFrameDelayTwoWayMax
Contains the average two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
jnxSoamDmCurrentStatsEntry 7jnxSoamDmCurrentStatsFrameDelayTwoWayAvg
Contains the minimum one-way frame
delay in the forward direction calculated
by this MEP for this Measurement
Interval. The value of this object may not
be accurate in the absence of sufficiently
precise clock synchronization. This object
is undefined is jnxSoamDmCfgType is
dm1DmTx.
jnxSoamDmCurrentStatsEntry 8jnxSoamDmCurrentStatsFrameDelayForwardMin
Copyright © 2017, Juniper Networks, Inc.1208
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English