Juniper ACX2000 Configuration Guide

Table 97: jnxSoamDmCurrentStatsTable (continued)
DescriptionObject IDObject
Contains the maximum one-way frame
delay in the forward direction calculated
by this MEP for this Measurement
Interval. The value of this object may not
be accurate in the absence of sufficiently
precise clock synchronization. This object
is undefined is jnxSoamDmCfgType is
dm1DmTx.
jnxSoamDmCurrentStatsEntry 9jnxSoamDmCurrentStatsFrameDelayForwardMax
Contains the average one-way frame
delay in the forward direction calculated
by this MEP for this Measurement
Interval. The value of this object may not
be accurate in the absence of sufficiently
precise clock synchronization. This object
is undefined is jnxSoamDmCfgType is
dm1DmTx.
jnxSoamDmCurrentStatsEntry 10jnxSoamDmCurrentStatsFrameDelayForwardAvg
Contains the minimum one-way frame
delay in the backward direction
calculated by this MEP for this
Measurement Interval. The value of this
object may not be accurate in the
absence of sufficiently precise clock
synchronization. This object is undefined
is jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
jnxSoamDmCurrentStatsEntry 11jnxSoamDmCurrentStatsFrameDelayBackwardMin
Contains the maximum one-way frame
delay in the backward direction
calculated by this MEP for this
Measurement Interval. The value of this
object may not be accurate in the
absence of sufficiently precise clock
synchronization. This object is undefined
is jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
jnxSoamDmCurrentStatsEntry 12jnxSoamDmCurrentStatsFrameDelayBackwardMax
Contains the average one-way frame
delay in the backward direction
calculated by this MEP for this
Measurement Interval. The value of this
object may not be accurate in the
absence of sufficiently precise clock
synchronization. This object is undefined
is jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
jnxSoamDmCurrentStatsEntry 13jnxSoamDmCurrentStatsFrameDelayBackwardAvg
Contains the minimum one-way
inter-frame delay interval in the forward
direction calculated by this MEP for this
Measurement Interval. The value of this
object is undefined when
jnxSoamDmCfgType is dm1DmTx.
jnxSoamDmCurrentStatsEntry 14jnxSoamDmCurrentStatsIfdvForwardMin
1209Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English