Table 100: jnxSoamDmThresholdCfgTable (continued)
DescriptionObject IDObject
Contains a vector of bits that indicates
the type of SOAM DM thresholds
notifications that are enabled. A bit set
to '1' enables the specific SOAM DM
threshold notification and when the
specific counter is enabled and the
threshold is crossed a notification is
generated. A bit set to '0' disables the
specific SOAM DM threshold notification.
If a particular SOAM DM threshold is not
supported the BIT value is set to '0'.
bJnxSoamDmMeasuredFrameDelayTwoWayThreshold(0)—Enables
or disables measured frame two-way
delay threshold notification. The
notification is sent immediately when the
jnxSoamDmMeasuredStatsFrameDelayTwoWay
value is greater than or equal to threshold
value.
bJnxSoamDmMaxFrameDelayTwoWayThreshold(1)—Enables
or disables maximum frame two-way
delay threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsFrameDelayTwoWayMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgFrameDelayTwoWayThreshold(2)—Enables
or disables average frame two-way delay
threshold notification. The notification is
sent when at the end of a Measurement
Interval if the
jnxSoamDmCurrentStatsFrameDelayTwoWayAvg
value is greater than or equal to the
threshold value.
bJnxSoamDmMeasuredIfdvTwoWayThreshold(3)—Enables
or disables measured frame IFDV
two-way threshold notification. The
notification is sent immediately when the
jnxSoamDmMeasuredStatsIfdvTwoWay
value is greater than or equal to threshold
value.
bJnxSoamDmMaxIfdvTwoWayThreshold(4)—Enables
or disables maximum frame IFDV
two-way threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsIfdvTwoWayMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgIfdvTwoWayThreshold(5)—Enables
or disables average frame IFDV two-way
threshold notification. The notification is
sent when at the end of a Measurement
Copyright © 2017, Juniper Networks, Inc.1222
ACX Series Universal Access Router Configuration Guide