Juniper ACX2000 Configuration Guide

Table 100: jnxSoamDmThresholdCfgTable (continued)
DescriptionObject IDObject
Interval if the
jnxSoamDmCurrentStatsIfdvTwoWayAvg
value is greater than or equal to the
threshold value.
bJnxSoamDmMaxFrameDelayRangeTwoWayThreshold(6)—Enables
or disables maximum Frame Delay Range
two-way threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgFrameDelayRangeTwoWayThreshold(7)—Enables
or disables average Frame Delay Range
two-way threshold notification. The
notification is sent when at the end of a
Measurement Interval if the
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg
value is greater than or equal to the
threshold value.
bJnxSoamDmMeasuredFrameDelayForwardThreshold(8)—Enables
or disables measured forward frame
delay threshold notification. The
notification is sent immediately when the
jnxSoamDmMeasuredStatsFrameDelayForward
value is greater than or equal to threshold
value.
bJnxSoamDmMaxFrameDelayForwardThreshold(9)—Enables
or disables maximum forward frame
delay threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsFrameDelayForwardMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgFrameDelayForwardThreshold(10)—Enables
or disables average forward frame delay
threshold notification. The notification is
sent when at the end of a Measurement
Interval if the
jnxSoamDmCurrentStatsFrameDelayForwardAvg
value is greater than or equal to the
threshold value.
1223Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English