Name: Juniper ACX2000
Brand: Juniper
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Action From operational mode, enter the show vpls connections command.

user@PE2> show vpls connections

Layer-2 VPN connections:

Legend for connection status (St)

EI -- encapsulation invalid NC -- interface encapsulation not CCC/TCC/VPLS

EM -- encapsulation mismatch WE -- interface and instance encaps not same

VC-Dn -- Virtual circuit down NP -- interface hardware not present

CM -- control-word mismatch -> -- only outbound connection is up

CN -- circuit not provisioned <- -- only inbound connection is up

OR -- out of range Up -- operational

OL -- no outgoing label Dn -- down

LD -- local site signaled down CF -- call admission control failure

RD -- remote site signaled down SC -- local and remote site ID collision

LN -- local site not designated LM -- local site ID not minimum designated

RN -- remote site not designated RM -- remote site ID not minimum designated

XX -- unknown connection status IL -- no incoming label

MM -- MTU mismatch MI -- Mesh-Group ID not available

BK -- Backup connection ST -- Standby connection

PF -- Profile parse failure PB -- Profile busy

RS -- remote site standby SN -- Static Neighbor

LB -- Local site not best-site RB -- Remote site not best-site

VM -- VLAN ID mismatch

Legend for interface status

Up -- operational

Dn -- down

Instance: customer

VPLS-id: 601

Neighbor Type St Time last up # Up trans

10.255.14.217(vpls-id 601) rmt Up Oct 9 16:29:02 2012 1

Remote PE: 10.255.14.217, Negotiated control-word: No

Incoming label: 800001, Outgoing label: 299904

Negotiated PW status TLV: No

Local interface: vt-2/0/10.84934914, Status: Up, Encapsulation: VLAN

Description: Intf - vpls customer neighbor 10.255.14.217 vpls-id 601

user@PE3> show vpls connections