Action user@CE1> request l2circuit-switchover virtual-circuit-id 601 neighbor 10.255.14.225
user@CE1> ping 10.255.14.215
PING 10.255.14.215 (10.255.14.215): 56 data bytes
64 bytes from 10.255.14.215: icmp_seq=0 ttl=64 time=0.738 ms
64 bytes from 10.255.14.215: icmp_seq=1 ttl=64 time=0.627 ms
64 bytes from 10.255.14.215: icmp_seq=2 ttl=64 time=0.629 ms
^C
--- 10.255.14.215 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.627/0.665/0.738/0.052 ms
Meaning The successful ping from Device CE1 to Device CE2 shows that the pseudowire between
Device PE1 and PE2 is operational. Now, if you ping Device CE3 from Device CE1, the ping
should fail.
Related
Documentation
• Application Note: Demystifying H-VPLS
• Example: Configuring H-VPLS Without VLANs
• Redundant Pseudowires for Layer 2 Circuits and VPLS on page 604
• Configuring Redundant Pseudowires for Layer 2 Circuits and VPLS on page 606
1323Copyright © 2017, Juniper Networks, Inc.
Chapter 35: Configuring Virtual Private LAN Service
To Next Page
Loading...
Need help?
General
