Juniper ACX2000

}
}
ge-0/1/6 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 100;
input-vlan-map {
push;
vlan-id 1000;
}
output-vlan-map pop;
}
}
[edit routing-options]
ppm {
traceoptions {
file ppmd size 100m;
flag packet;
flag event;
flag distribute;
flag pipe;
flag all;
}
}
[edit firewall]
family bridge {
filter ft1 {
term t1 {
from {
user-vlan-id 100;
}
then count loopback;
}
}
}
[edit bridge-domains]
bd1 {
interface ge-0/1/4.0;
interface ge-0/1/6.0;
}
Related
Documentation
RFC 2544-Based Benchmarking Tests Overview on page 1335•
• Layer 2 and Layer 3 RFC 2544-Based Benchmarking Test Overview on page 1338
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• RFC 2544-Based Benchmarking Test States on page 1358
• Example: Configuring an RFC 2544-Based Benchmarking Test for Layer 3 IPv4 Services
on page 1359
• Example: Configuring an RFC 2544-Based Benchmarking Test for NNI Direction of
Ethernet Pseudowires on page 1367
1357Copyright © 2017, Juniper Networks, Inc.
Chapter 37: Configuring RFC 2544-Based Benchmarking Tests