9. Configure an RFC 2544-based benchmarking test for the RPM instance.
[edit services rpm]
user@host# edit rfc2544-benchmarking
10. Define a name for a test profile—for example, throughput.
[edit services rpm rfc2544-benchmarking]
user@host# edit profiles test-profile throughput
11. Configure the type of test to be performed as throughput.
[edit services rpm rfc2544-benchmarking profiles test-profile throughput]
user@host# set test-type throughput
12. Specify the size of the test packet as 64 bytes.
[edit services rpm rfc2544-benchmarking profiles test-profile throughput]
user@host# set test-type packet-size 64
13. Specify the period—for example, 20 minutes—for which the test is to be performed
in hours, minutes, or seconds by specifying a number followed by the letter h (for
hours), m (for minutes), or s (for seconds), respectively.
[edit services rpm rfc2544-benchmarking profiles test-profile throughput]
user@host# set test-type test-duration 20m
14. Define the theoretical maximum bandwidth for the test in kilobits per second, with
a value from 1,000 Kbps through 1,000,000 Kbps.
[edit services rpm rfc2544-benchmarking profiles test-profile throughput]
user@host# set test-type bandwidth-kbps 500
15. Enter the up command to go the previous level in the configuration hierarchy.
[edit services rpm rfc2544-benchmarking profiles test-profile throughput]
user@host# up
16. Enter the up command to go the previous level in the configuration hierarchy.
[edit services rpm rfc2544-benchmarking profiles]
user@host# up
17. Define a name for the test—for example, test1. The test name identifier can be up
to 32 characters in length.
[edit services rpm rfc2544-benchmarking]
user@host# edit tests test-name test1
18. Specify the name of the test profile—for example, throughput—to be associated
with a particular test name.
[edit services rpm rfc2544-benchmarking tests test-name test1]
Copyright © 2017, Juniper Networks, Inc.1362
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
