Juniper ACX2000

Configuration server of last committed file: 10.25.100.1
Interface:
Name: ge-0/0/0
State: Configuration Acquisition
Acquired:
Address: 192.168.124.75
Hostname: host-ge-000
Hostname source: DNS
Configuration filename: router-ge-000.conf
Configuration filename server: 10.25.100.3
Address acquisition:
Protocol: BOOTP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Related
Documentation
• ACX Series Autoinstallation Overview on page 75
• Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
• Autoinstallation Configuration of ACX Series Universal Access Routers on page 78
• Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
• USB Autoinstallation on ACX Series Routers on page 80
• Autoinstallation on ACX Series Routers in Hybrid Mode Overview on page 81
• Prerequisites for Autoinstallation on ACX Series Routers in Hybrid Mode on page 83
• Autoinstallation Process on a New ACX Series Router in Hybrid Mode on page 84
• autoinstallation on page 1442
• show system autoinstallation status on page 3178
89Copyright © 2017, Juniper Networks, Inc.
Chapter 3: Configuring Autoinstallation