Juniper ACX2000 - Page 1470

•
metric (Aggregate, Generated, or Static Route) on page 1612
•
message-rate-limit on page 1613
•
min-announce-interval on page 1614
•
min-delay-response-interval on page 1615
•
min-sync-interval on page 1616
•
minimum-links on page 1617
•
mld on page 1618
•
mode (Chassis Alarm Relay Input and Output) on page 1619
•
mode (Interfaces) on page 1620
•
mode (RFC 2544 Benchmarking) on page 1621
•
mrru on page 1622
•
mtu on page 1623
•
multicast (Virtual Tunnel in Routing Instances) on page 1627
•
multicast-mode (PTP Master and Slave Interfaces) on page 1628
•
multilink-max-classes on page 1629
•
multilink-class on page 1630
•
multipath (Routing Options) on page 1631
•
native-vlan-id on page 1632
•
network-option on page 1634
•
no-bfd-triggered-local-repair on page 1635
•
no-mac-learning on page 1636
•
no-local-switching on page 1637
•
no-local-switching (VPLS) on page 1638
•
no-partition on page 1639
•
no-root-port on page 1640
•
no-vrf-advertise on page 1641
•
no-vrf-propagate-ttl on page 1642
•
oam-liveness on page 1643
•
oam-period on page 1644
•
options (Routing Options) on page 1645
•
output (Chassis Alarm Relay) on page 1646
•
outer-tag-protocol-id (RFC 2544 Benchmarking) on page 1646
•
overrides (DHCP Relay Agent) for ACX on page 1647
•
ovlan-cfi (RFC 2544 Benchmarking) on page 1648
•
ovlan-id (RFC 2544 Benchmarking) on page 1648
•
packet-action on page 1649
•
ovlan-priority (RFC 2544 Benchmarking) on page 1652
Copyright © 2017, Juniper Networks, Inc.1412
ACX Series Universal Access Router Configuration Guide