Juniper ACX2000

•
packet-loss-priority (RFC 2544 Benchmarking) on page 1652
•
packet-size (RFC 2544 Benchmarking) on page 1653
•
partition on page 1654
•
passive (Routing Options) on page 1654
•
pce on page 1655
•
pcep on page 1657
•
pce-group (PCE) on page 1658
•
pce-group (Protocols PCEP) on page 1659
•
pce-type on page 1660
•
peak-rate on page 1661
•
pim on page 1662
•
policing-action on page 1666
•
policy (Aggregate and Generated Routes) on page 1667
•
port (Alarm Relay Input) on page 1668
•
port (Alarm Relay Output) on page 1669
•
ppm on page 1670
•
ppp-options on page 1672
•
preference (Routing Options) on page 1674
•
primary (Virtual Tunnel in Routing Instances) on page 1676
•
priority-hold-time on page 1677
•
profiles (RFC 2544 Benchmarking) on page 1678
•
protect core on page 1679
•
protection-group on page 1680
•
promiscuous-mode on page 1682
•
propagate-settings on page 1683
•
priority (Chassis Synchronization Source) on page 1684
•
psn-vci (ATM CCC Cell-Relay Promiscuous Mode VPI/VCI Swapping) on page 1685
•
psn-vpi (ATM CCC Cell-Relay Promiscuous Mode VPI/VCI Swapping) on page 1686
•
quality-level (Chassis Synchronization Source Interface) on page 1687
•
quality-level (Clock Class Mapping PTP Slave) on page 1689
•
quality-mode-enable on page 1690
•
querier (performance-monitoring) on page 1691
•
receive-failure-threshold (RFC 2544 Benchmarking) on page 1692
•
relay (Chassis Alarm) on page 1693
•
request (Chassis Synchronization Source) on page 1694
•
rewrite-rules (Physical Interfaces) on page 1695
•
reflect-etype (RFC 2544 Benchmarking) on page 1696
1413Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements