Required Privilege
Level
view
Related
Documentation
Clearing DHCP Bindings for Subscriber Access•
• show dhcp relay binding on page 2455
List of Sample Output clear dhcp relay binding on page 1793
clear dhcp relay binding all on page 1793
clear dhcp relay binding dual-stack all on page 1793
clear dhcp relay binding interface on page 1794
clear dhcp relay binding <interfaces-vlan> on page 1794
clear dhcp relay binding <interfaces-wildcard> on page 1794
Output Fields See show dhcp relay binding for an explanation of output fields.
Sample Output
clear dhcp relay binding
The following sample output displays the address bindings in the DHCP client table
before and after the clear dhcp relay binding command is issued.
user@host> show dhcp relay binding
IP address Hardware address Type Lease expires at
198.51.100.32 00:00:5e:00:53:01 active 2007-02-08 16:41:17 EST
192.168.14.8 00:00:5e:00:53:02 active 2007-02-10 10:01:06 EST
user@host> clear dhcp relay binding 198.51.100.32
user@host> show dhcp relay binding
IP address Hardware address Type Lease expires at
192.168.14.8 00:00:5e:00:53:02 active 2007-02-10 10:01:06 EST
clear dhcp relay binding all
The following command clears all DHCP relay agent bindings:
user@host> clear dhcp relay binding all
clear dhcp relay binding dual-stack all
The following command clears all DHCP relay agent bindings for all DHCPv4 clients and
the associated DHCPv6 bindings in the single-session DHCP dual stack. DHCPv6 clients
created in a DHCPv6-only stack are not affected.
user@host> clear dhcp relay binding dual-stack all
1793Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
