Juniper ACX2000 Configuration Guide

Table 114: show bgp neighbor Output Fields (continued)
Field DescriptionField Name
Last error that occurred in the BGP session:
• Cease—An error occurred, such as a version mismatch, that caused the session to close.
• Finite State Machine Error—In setting up the session, BGP received a message that it did not
understand.
• Hold Time Expired—The session's hold time expired.
• Message Header Error—The header of a BGP message was malformed.
• Open Message Error—A BGP open message contained an error.
• None—No errors occurred in the BGP session.
• Update Message Error—A BGP update message contained an error.
Last error
Name of the export policy that is configured on the peer.Export
Name of the import policy that is configured on the peer.Import
Configured BGP options:
• AddressFamily—Configured address family: inet or inet-vpn.
• AdvertiseBGPStatic—Configured BGP static routes are advertised.
• AutheKeyChain—Authentication key change is enabled.
• DropPathAttributes—Certain path attributes are configured to be dropped from neighbor updates
during inbound processing.
• GracefulRestart—Graceful restart is configured.
• HoldTime—Hold time configured with the hold-time statement. The hold time is three times the
interval at which keepalive messages are sent.
• IgnorePathAttributes—Certain path attributes are configured to be ignored in neighbor updates
during inbound processing.
• Local Address—Address configured with the local-address statement.
• LLGR—BGP long-lived graceful restart capability is configured.
• LLGRHelperDisabled—BGP long-lived graceful restart is completely disabled for a neighbor.
• Multihop—Allow BGP connections to external peers that are not on a directly connected network.
• NLRI—Configured MBGP state for the BGP group: multicast, unicast, or both if you have configured
nlri any.
• Peer AS—Configured peer autonomous system (AS).
• Preference—Preference value configured with the preference statement.
• Refresh—Configured to refresh automatically when the policy changes.
• Rib-group—Configured routing table group.
• RFC6514CompliantSafi129—Configured SAFI 129 according to RFC 6514 (BGP VPN multicast used
to use SAFI 128).
Options
Path attribute codes that are dropped from neighbor updates.Path-attributes
dropped
Path attribute codes that are ignored during neighbor updates.Path-attributes ignored
BGP neighbor does not support long-lived graceful restart (LLGR) restarter mode completely.Peer does not support
LLGR Restarter or
Receiver functionality
1813Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English