show bgp summary group on page 1835
show bgp summary (BGP GracefulRestart or Long-Lived Graceful Restart)on page 1836
Output Fields Table 116 on page 1832 describes the output fields for the show bgp summary command.
Output fields are listed in the approximate order in which they appear.
Table 116: show bgp summary Output Fields
Field DescriptionField Name
Number of BGP groups.Groups
Number of BGP peers.Peers
Number of down BGP peers.Down peers
Name of routing table.Table
Total number of paths.Tot Paths
Number of active routes.Act Paths
Number of routes currently inactive because of damping or other reasons. These routes do not appear
in the forwarding table and are not exported by routing protocols.
Suppressed
Number of withdrawn routes stored locally to keep track of damping history.History
Number of routes with a figure of merit greater than zero, but still active because the value has not
reached the threshold at which suppression occurs.
Damp State
Routes in process by BGP import policy.Pending
Address of each BGP peer. Each peer has one line of output.Peer
Peer's AS number.AS
Number of packets received from the peer.InPkt
Number of packets sent to the peer.OutPkt
Number of BGP packets that are queued to be transmitted to a particular neighbor. It normally is 0
because the queue usually is emptied quickly.
OutQ
Number of times the BGP session has gone down and then come back up.Flaps
Last time since the neighbor transitioned to or from the established state.Last Up/Down
Copyright © 2017, Juniper Networks, Inc.1832
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
