Juniper ACX2000 Configuration Guide

Table 117: show bridge mac-table Output Fields (continued)
Field DescriptionField Name
Debugging flags signifying that the MAC address is present in various lists.Layer 2 flags
Spanning Tree Protocol epoch number identifying when the MAC address
was learned. Used for debugging.
Epoch
Sequence number assigned to this MAC address. Used for debugging.Sequence number
Mask of the Packet Forwarding Engines where this MAC address was learned.
Used for debugging.
Learning mask
Creation time of the logical interface when this MAC address was learned.
Used for debugging.
IPC generation
Sample Output
show bridge mac-table
user@host> show bridge mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)
Routing instance : default-switch
Bridging domain : test1, VLAN : 1
MAC MAC Logical NH RTR
address flags interface Index ID
01:00:0c:cc:cc:cc S,NM NULL
01:00:0c:cc:cc:cd S,NM NULL
01:00:0c:cd:cd:d0 S,NM NULL
64:87:88:6a:17:d0 D ae0.1
64:87:88:6a:17:f0 D ae0.1
show bridge mac-table (with Layer 2 Services over GRE Interfaces)
user@host> show bridge mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned
SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)
Routing instance : default-switch
Bridging domain : vlan-1, VLAN : 1
MAC MAC Logical
address flags interface
00:01:01:00:01:f7 D,SE gr-1/2/10.0
00:03:00:32:01:f7 D,SE gr-1/2/10.0
00:00:21:11:11:10 DL ge-1/0/0.0
00:00:21:11:11:11 DL ge-1/1/0.0
Routing instance : default-switch
Bridging domain : vlan-2, VLAN : 2
MAC MAC Logical
address flags interface
00:02:01:33:01:f7 D,SE gr-1/2/10.1
1841Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English