Required Privilege
Level
view
List of Sample Output show bridge mac-table on page 1841
show bridge mac-table (with Layer 2 Services over GRE Interfaces) on page 1841
show bridge mac-table (with VXLAN enabled) on page 1842
show bridge mac-table age (for GE interface) on page 1842
show bridge mac-table age (for AE interface) on page 1842
show bridge mac-table count on page 1842
show bridge mac-table detail on page 1843
show bridge mac-table instance pbb-evpn on page 1843
show bridge mac-table on page 1843
Output Fields Table 117 on page 1840 describes the output fields for the show bridge mac-table command.
Output fields are listed in the approximate order in which they appear.
Table 117: show bridge mac-table Output Fields
Field DescriptionField Name
Age of a single mac-address.Age
Name of the routing instance.Routing instance
Name of the bridging domain.Bridging domain
MAC address or addresses learned on a logical interface.MAC address
Status of MAC address learning properties for each interface:
• S—Static MAC address is configured.
• D—Dynamic MAC address is configured.
• L—Locally learned MAC address is configured.
• C—Control MAC address is configured.
• SE—MAC accounting is enabled.
• NM—Non-configured MAC.
• R—Remote PE MAC address is configured.
• P—MAC Pinned interface is configured
MAC flags
Name of the logical interface.Logical interface
Number of MAC addresses learned on the specific routing instance or
interface.
MAC count
Name of the logical interface on which the MAC address was learned.Learning interface
VLAN ID of the routing instance or bridge domain in which the MAC address
was learned.
Learning VLAN
VXLAN Network Identifier (VNI).VXLAN ID/VXLAN
Copyright © 2017, Juniper Networks, Inc.1840
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
