Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX 2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
satellite option introduced in Junos OS Release 14.2R3.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description (M40e, M120, M160, M320, MX Series, T Series routers, EX Series, QFX Series, and PTX
Series routers only) Display environmental information about Flexible PIC Concentrators
(FPCs).
Options none—Display environmental information about all FPCs. On a TX Matrix router, display
environmental information about all FPCs on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router, display environmental information about
all FPCs on the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers only) (Optional) Display environmental information
for the FPCs in all the members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Interconnect device.
lcc number—(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card
chassis number.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display environmental information for the
FPCs in the local Virtual Chassis member.
1957Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
