member member-id—(MX Series routers only) (Optional) Display environmental
information for the FPCs in the specified member of the Virtual Chassis configuration.
Replace member-id with a value of 0 or 1.
satellite [fpc-slot slot-id | device-alias alias-name]—(Junos Fusion only)(Optional)
Display environmental information for the FPCs in the specified satellite device in a
Junos Fusion, or for all satellite devices in the Junos Fusion if no satellite devices are
specified.
slot or fpc-slot—(Optional) Display environmental information about an individual FPC:
• (TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, if you specify
the number of the T640 router by using only the lcc number option (the
recommended method), replace slot with a value from 0 through 7. Similarly, on
a TX Matrix Plus router, if you specify the number of the router by using only the
lcc number option (the recommended method), replace slot with a value from 0
through 7. Otherwise, replace slot with a value from 0 through 31. For example, the
following commands have the same result:
user@host> show chassis environment fpc 1 lcc 1
user@host> show chassis environment fpc 9
• M120 router—Replace slot with a value from 0 through 5.
• MX240 router—Replace slot with a value from 0 through 2.
• MX480 router—Replace slot with a value from 0 through 5.
• MX960 router—Replace slot with a value from 0 through 11.
• MX2010 router—Replace slot with a value from 0 through 9.
• MX2020 router—Replace slot with a value from 0 through 19.
• MX2008 router—Replace slot with a value from 0 through 9.
• Other routers—Replace slot with a value from 0 through 7.
• EX Series switches:
• EX3200 switches and EX4200 standalone switches—Replace slot with 0.
• EX4200 switches in a Virtual Chassis configuration—Replace slot with a value
from 0 through 9 (switch’s member ID).
• EX6210 switches–Replace slot with a value from 0 through 3 (line card only),
4 or 5 (line card or Switch Fabric and Rotuing Engine (SRE) module), or 6 through
9 (line card only).
• EX8208 switches—Replace slot with a value from 0 through 7 (line card).
• EX8216 switches—Replace slot with a value from 0 through 15 (line card).
• QFX3500 switches —Replace fpc-slot with 0 through 15.
• PTX5000 Packet Transport Router—Replace fpc-slot with 0 through 7.
• PTX3000 Packet Transport Router—Replace fpc-slot with 0 through 15.
Copyright © 2017, Juniper Networks, Inc.1958
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
