Juniper ACX2000 Configuration Guide

show chassis environment routing-engine interconnect-device (QFabric
System) on page 2011
show chassis environment routing-engine (PTX5000 Packet Transport
Router) on page 2011
show chassis environment routing-engine (PTX10008 Router) on page 2012
show chassis environment routing-engine (ACX5048 and ACX5096
Routers) on page 2012
show chassis environment routing-engine (ACX500 Routers) on page 2012
show chassis environment routing-engine (PTX5000 (RE-PTX-X8-64G), MX240
(RE-S-X6-64G), MX480 (RE-S-X6-64G), MX960 (RE-S-X6-64G), MX2010
(RE-MX2K-X8-64G), MX2020 (RE-MX2K-X8-64G) on page 2012
Output Fields Table 124 on page 2009 lists the output fields for the show chassis environmentrouting-engine
command. Output fields are listed in the approximate order in which they appear.
Table 124: show chassis environment routing-engine Output Fields
Field DescriptionField Name
Number of the Routing Engine slot: 0 or 1.Routing engine slot status
Status of the Routing Engine:
• Online Master—Routing Engine is online, operating as Master.
• Online Standby—Routing Engine is online, operating as Standby.
• Offline—Routing Engine is offline.
State
Temperature of the air flowing past the Routing Engine.Temperature
(PTX Series and T4000 Core Routers only) Temperature of the air
flowing past the Routing Engine CPU.
CPU Temperature
Sample Output
show chassis environment routing-engine (Nonredundant)
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State Online Master
Temperature 27 degrees C / 80 degrees
show chassis environment routing-engine (Redundant)
user@host> show chassis environment routing-engine
Route Engine 0 status:
State: Online Master
Temperature: 26 degrees C / 78 degrees F
Route Engine 1 status:
State: Online Standby
Temperature: 26 degrees C / 78 degrees F
2009Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English