Plus router, if you specify the number of the specified router (line-card chassis)
by using the lcc number option (the recommended method), replace fpc-slot with
a value from 0 through 7. Otherwise, replace fpc-slot with a value from 0 through
31. For example, the following commands have the same result:
user@host> show chassis fpc detail 1 lcc 1
user@host> show chassis fpc detail 9
• M120 router—Replace fpc-slot with a value from 0 through 5.
• MX80 router—Replace fpc-slot with a value from 0 through 1.
• MX104 and MX104-40G routers—Replace fpc-slot with a value from 0 through 2.
• MX240 router—Replace fpc-slot with a value from 0 through 2.
• MX480 router—Replace fpc-slot with a value from 0 through 5.
• MX-960 router—Replace fpc-slot with a value from 0 through 11.
• MX2010 router—Replace fpc-slot-number with a value from 0 through 9.
• MX2008 router—Replace fpc-slot-number with a value from 0 through 9.
• MX2020 router—Replace fpc-slot-number with a value from 0 through 19.
• Other routers—Replace fpc-slot with a value from 0 through 7.
• EX Series switches:
• EX3200 switches and EX4200 standalone switches—Replace fpc-slot with 0.
• EX4200 switches in a Virtual Chassis configuration—Replace fpc-slot with a
value from 0 through 9.
• EX6210 switches—Replace fpc-slot with a value from 0 through 9.
• EX8208 switches—Replace fpc-slot with a value from 0 through 7.
• EX8216 switches—Replace fpc-slot with a value from 0 through 15.
• EX9204 switches—Replace fpc-slot with a value from 0 through 2.
• EX9208 switches—Replace fpc-slot with a value from 0 through 5.
• EX9214 switches—Replace fpc-slot with a value from 0 through 11.
• QFX Series:
• QFXSeries and OCX Series switches—Replace fpc-slot with 0.
• QFabric systems—Replace fpc-slot with 0 through 31 on the Interconnect device.
• PTX Series Packet Transport Routers:
• PTX5000 Packet Transport Router—Replace fpc-slot with a value from 0 through
7.
• ACX Series Universal Access Routers:
Copyright © 2017, Juniper Networks, Inc.2036
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
