• ACX1000 and ACX2000 Universal Access Routers—Replace fpc-slot with 0.
local—(MX Series routers and EX Series switches only) (Optional) Display status
information for all FPCs on the local Virtual Chassis member.
member member-id—(MX Series routers and EX Series switches only) (Optional) Display
status information for all FPCs on the specified member of the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
node-device name—(QFabric systems only) (Optional) Display status information for
each Node device. Each Node device is equivalent to an FPC.
pic-status—(Optional) Display status information for all PICs or for the PIC in the specified
slot (see fpc-slot).
2037Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
