Juniper ACX2000 Configuration Guide

<all-members>
<local>
<member member-id>
Syntax (MX104,
MX2010, MX2020,
show chassis hardware
<clei-models>
<detail | extensive>
MX10003, and
<models>
MX2008 3D Universal
Edge Routers)
<satellite [slot-id slot-id |device-alias alias-name]>
Syntax (QFX Series) show chassis hardware
<detail | extensive>
<clei-models>
<interconnect-device name>
<node-device name>
<models>
Syntax (OCX Series) show chassis hardware
<detail | extensive>
<clei-models>
<models>
Syntax (PTX Series
Packet Transport
Routers)
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Syntax (ACX Series
Universal Access
Routers)
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Syntax (ACX5048 and
ACX5096 Routers)
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Syntax (ACX500
Routers)
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Release Information Command introduced before Junos OS Release 7.4.
models option introduced in Junos OS Release 8.2.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
2093Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English