Juniper ACX2000 Configuration Guide

Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2010 and MX2020 3D Universal
Edge Routers.
Information for disk and usb introduced in Junos OS Release 15.1X53-D60 for QFX10002,
QFX10008, and QFX10016 switches.
Command introduced in Junos OS Release 15.1X54-D20 for ACX5048 and ACX5096
Routers.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description Display a list of all Flexible PIC Concentrators (FPCs) and PICs installed in the router or
switch chassis, including the hardware version level and serial number.
In the EX Series switch command output, FPC refers to the following:
• On EX2200 switches, EX3200 switches, EX4200 standalone switches, and EX4500
switches—Refers to the switch; FPC number is always 0.
• On EX4200 switches in a Virtual Chassis configuration—Refers to the member of a
Virtual Chassis; FPC number equals the member ID, from 0 through 9.
• On EX8208 and EX8216 switches—Refers to a line card; FPC number equals the slot
number for the line card.
On QFX3500, QFX5100, and OCX Series standalone switches, and PTX1000 routers
both the FPC and FPC number are always 0.
On T4000 Type 5 FPCs, there are no top temperature sensor or bottom temperature
sensor parameters. Instead, fan intake temperature sensor and fan exhaust temperature
sensors parameters are displayed.
Starting from Junos OS Release 11.4, the output of the show chassis hardware models
operational mode command displays the enhanced midplanes FRU model numbers
(CHAS-BP3-MX240-S, CHAS-BP3-MX480-S or CHAS-BP3-MX960-S) based on the
router. Prior to release 11.4, the FRU model numbers are left blank when the router has
enhanced midplanes. Note that the enhanced midplanes are introduced through the
Junos OS Release 13.3, but can be supported on all Junos OS releases.
Starting with Junos OS Release 14.1, the output of the show chassis hardware detail |
extensive | clei-models | models operational mode command displays the new DC power
supply module (PSM) and power distribution unit (PDU) that are added to provide power
to the high-density FPC (FPC2-PTX-P1A) and other components in a PTX5000 Packet
Transport Router.
Options none—Display information about hardware. For a TX Matrix router, display information
about the TX Matrix router and its attached T640 routers. For a TX Matrix Plus router,
display information about the TX Matrix Plus router and its attached routers.
Copyright © 2017, Juniper Networks, Inc.2094
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English