clei-models—(Optional) Display Common Language Equipment Identifier (CLEI) barcode
and model number for orderable field-replaceable units (FRUs).
detail—(Optional) Include RAM and disk information in output.
extensive—(Optional) Display ID EEPROM information.
all-members—(MX Series routers only) (Optional) Display hardware-specific information
for all the members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Interconnect device.
lcc number—(TX Matrix routers and TX Matrix Plus router only) (Optional) On a TX Matrix
router, display hardware information for a specified T640 router (line-card chassis)
that is connected to the TX Matrix router. On a TX Matrix Plus router, display hardware
information for a specified router (line-card chassis) that is connected to the
TX Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display hardware-specific information for the
local Virtual Chassis members.
member member-id—(MX Series routers and EX Series switches) (Optional) Display
hardware-specific information for the specified member of the Virtual Chassis
configuration. Replace member-id variable with a value 0 or 1.
models—(Optional) Display model numbers and part numbers for orderable FRUs and,
for components that use ID EEPROM format v2, the CLEI code.
node-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Node device.
satellite [slot-id slot-id | device-alias alias-name]—(Junos Fusion only) (Optional)
Display hardware information for the specified satellite device in a Junos Fusion, or
for all satellite devices in the Junos Fusion if no satellite devices are specified.
scc—(TX Matrix router only) (Optional) Display hardware information for the TX Matrix
router (switch-card chassis).
2095Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
