Juniper ACX2000 Configuration Guide

Syntax (ACX5048 and
ACX5096 Routers)
show chassis pic
(fpc-slot slot-number | pic-slot slot-number)
Syntax (ACX500
Routers)
show chassis pic
(fpc-slot slot-number | pic-slot slot-number)
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 13.2 for PTX Series Packet Transport Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
transport option introduced in Junos OS Release 16.1R1 for MX Series Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description Display status information about the PIC installed in the specified Flexible PIC
Concentrator (FPC) and PIC slot.
Options fpc-slot slot-number—Display information about the PIC in this particular FPC slot:
• On a TX Matrix router, if you specify the number of the T640 router by using the
lcc number option (the recommended method), replace slot-number with a value
from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31.
Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 router
by using the lcc number option (the recommended method), replace slot-number
with a value from 0 through 7. Otherwise, replace slot-number with a value from
0 through 31. For example, the following commands have the same result:
user@host> show chassis pic fpc-slot 1 lcc 1 pic-slot 1
user@host> show chassis pic fpc-slot 9 pic-slot 1
• M120 routers only—Replace slot-number with a value from 0 through 5.
• MX80 routers only—Replace slot-number with a value from 0 through 1.
• MX104 routers only—Replace slot-number with a value from 0 through 2.
• MX240 routers only—Replace slot-number with a value from 0 through 2.
• MX480 routers only—Replace slot-number with a value from 0 through 5.
• MX960 routers only—Replace slot-number with a value from 0 through 11.
• MX2010 routers only—Replace slot-number with a value from 0 through 9.
Copyright © 2017, Juniper Networks, Inc.2334
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English