Syntax (MX104 3D
Universal Edge
Routers)
show chassis routing-engine
Syntax (MX10003 3D
Universal Edge
Routers)
show chassis routing-engine
<slot>
<bios>
<errors>
Syntax (PTX Series
Packet Transport
Routers)
show chassis routing-engine
Syntax (T Series
Routers)
show chassis routing-engine
<bios | slot>
Syntax (TX Matrix
Routers)
show chassis routing-engine
<bios | slot>
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
show chassis routing-engine
<bios | slot>
<lcc number | sfc number>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced in Junos OS Release in 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
satellite option introduced in Junos OS Release 14.2R3.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description Display the status of the Routing Engine.
Options none—Display information about one or more Routing Engines. On a TX Matrix router,
display information about all Routing Engines on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router, display information about all Routing
Engines on the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers only) (Optional) Display Routing Engine information
for all members of the Virtual Chassis configuration.
bios—(Optional) Display the (BIOS) firmware version.
2359Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
