errors—(Optional) Display routing engine errors.
interconnect-device number—(QFabric systems only) (Optional) Display Routing Engine
information for a specified Interconnect device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display Routing Engine information for a specified T640 router (line-card chassis)
that is connected to the TX Matrix router. On a TX Matrix Plus router, display Routing
Engine information for a specified router (line-card chassis) that is connected to the
TX Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display Routing Engine information for the
local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display Routing Engine
information for the specified member of the Virtual Chassis configuration. For an MX
Series Virtual Chassis, replace member-id with a value of 0 or 1.
node-device number—(QFabric systems only) (Optional) Display Routing Engine
information for a specified Node device.
satellite [slot-id slot-id |device-alias alias-name]—(Junos Fusion only) (Optional)
Display Routing Engine information for the specified satellite device in a Junos Fusion,
or for all satellite devices in the Junos Fusion if no satellite devices are specified.
scc—(TX Matrix routers only) (Optional) Display Routing Engine information for the TX
Matrix router (switch-card chassis).
sfc number—(TX Matrix Plus routers only) (Optional) Display Routing Engine information
for the TX Matrix Plus router (or switch-fabric chassis). Replace number with 0.
slot—(Systems with multiple Routing Engines) (Optional) Display information for an
individual Routing Engine. Replace slot with 0 or 1. For QFX3500 switches, there is
only one Routing Engine, so you do not need to specify the slot number.
Required Privilege
Level
view
Copyright © 2017, Juniper Networks, Inc.2360
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
