Table 134: show chassis routing-engine Output Fields (continued)
Field DescriptionField Name
Information about the Routing Engine's CPU utilization in the past 5 minutes:
• User—Percentage of CPU time being used by user processes.
• Background—Percentage of CPU time being used by background processes.
• Kernel—Percentage of CPU time being used by kernel processes.
• Interrupt—Percentage of CPU time being used by interrupts.
• Idle—Percentage of CPU time that is idle.
5 min CPU Utilization
NOTE: Supported only
on MX240, MX480,
MX960, MX2010,
MX10003, and
MX2020.
Information about the Routing Engine's CPU utilization in the past 15 minutes:
• User—Percentage of CPU time being used by user processes.
• Background—Percentage of CPU time being used by background processes.
• Kernel—Percentage of CPU time being used by kernel processes.
• Interrupt—Percentage of CPU time being used by interrupts.
• Idle—Percentage of CPU time that is idle.
15 min CPU Utilization
NOTE: Supported only
on MX240, MX480,
MX960, MX2010, and
MX2020.
Routing Engine model number.Model
(Systems with multiple Routing Engines) Identification number of the Routing Engine in this slot.Serial ID
Time at which the Routing Engine started running.Start time
How long the Routing Engine has been running.Uptime
BIOS version being run by the Routing Engine.Routing Engine BIOS
Version
2363Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
