To Next Page

To Previous Page

Table 137: show class-of-service interface Output Fields (continued)

Field DescriptionField Name

Names of any firewall filters to be evaluated when packets are received on the interface, including

any filters attached through activation of dynamic service.

Input Filter

Names of any firewall filters to be evaluated when packets are transmitted on the interface, including

any filters attached through activation of dynamic service.

Output Filter

Provides information about the physical link and displays one or more of the following values:

• ACFC—Address control field compression is configured. The Point-to-Point Protocol (PPP) session

negotiates the ACFC option.

• Give-Up—Link protocol does not continue connection attempts after repeated failures.

• Loose-LCP—PPP does not use the Link Control Protocol (LCP) to indicate whether the link protocol

is operational.

• Loose-LMI—Frame Relay does not use the Local Management Interface (LMI) to indicate whether

the link protocol is operational.

• Loose-NCP—PPP does not use the Network Control Protocol (NCP) to indicate whether the device

is operational.

• Keepalives—Link protocol keepalives are enabled.

• No-Keepalives—Link protocol keepalives are disabled.

• PFC—Protocol field compression is configured. The PPP session negotiates the PFC option.

Link flags

Current interface hold-time up and hold-time down, in milliseconds.Hold-times

Number of CoS queues configured.CoS queues

Date, time, and how long ago the interface went from down to up. The format is Last flapped:

year-month-day hour:minute:second:timezone (hour:minute:second ago). For example, Last flapped:

2002-04-26 10:52:40 PDT (04:33:20 ago).

Last flapped

Number and rate of bytes and packets received and transmitted on the physical interface.

• Input bytes—Number of bytes received on the interface.

• Output bytes—Number of bytes transmitted on the interface.

• Input packets—Number of packets received on the interface.

• Output packets—Number of packets transmitted on the interface.

Statistics last cleared

Number of IPv6 transit bytes and packets received and transmitted on the logical interface if IPv6

statistics tracking is enabled.

IPv6 transit statistics

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000