Juniper ACX2000 Configuration Guide

Sample Output
show dhcp relay binding
user@host> show dhcp relay binding
IP address Session Id Hardware address Expires State Interface
198.51.100.11 41 00:00:5e:00:53:01 86371 BOUND ge-1/0/0.0
198.51.100.12 42 00:00:5e:00:53:02 86371 BOUND ge-1/0/0.0
198.51.100.13 43 00:00:5e:00:53:03 86371 BOUND ge-1/0/0.0
198.51.100.14 44 00:00:5e:00:53:04 86371 BOUND ge-1/0/0.0
198.51.100.15 45 00:00:5e:00:53:05 86371 BOUND ge-1/0/0.0
show dhcp relay binding detail
user@host> show dhcp relay binding detail
Client IP Address: 198.51.100.11
Hardware Address: 00:00:5e:00:53:01
State: BOUND(DHCP_RELAY_STATE_BOUND_ON_INTF_DELETE)
Lease Expires: 2009-07-21 11:00:06 PDT
Lease Expires in: 86361 seconds
Lease Start: 2009-07-20 11:00:06 PDT
Lease time violated: yes
Last Packet Received: 2009–07–20 11:00:06 PDT
Incoming Client Interface: ge-1/0/0.0
Server Ip Address: 198.51.100.22
Server Interface: none
Bootp Relay Address: 198.51.100.32
Session Id: 41
Dual Stack Group: dual-stack-retail6
Dual Stack Peer Prefix: 2001:db8:0:4::/64
Dual Stack Peer Address: 2001:db8:1:0:8003::1/128
Client IP Address: 198.51.100.12
Hardware Address: 00:00:5e:00:53:02
State: BOUND(DHCP_RELAY_STATE_BOUND_ON_INTF_DELETE)
Lease Expires: 2009-07-21 11:00:06 PDT
Lease Expires in: 86361 seconds
Lease Start: 2009-07-20 11:00:06 PDT
Last Packet Received: 2009–07–20 11:00:06 PDT
Incoming Client Interface: ge-1/0/0.0
Server Ip Address: 198.51.100.22
Server Interface: none
Bootp Relay Address: 198.51.100.32
Session Id: 42
Generated Remote ID host:ge-1/0/0:100
show dhcp relay binding interface
user@host> show dhcp relay binding interface fe-0/0/2
IP address Hardware address Type Lease expires at
198.51.100.1 00:00:5e:00:53:01 active 2007-03-27 15:06:20 EDT
Copyright © 2017, Juniper Networks, Inc.2458
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English