Juniper ACX2000 Configuration Guide

Table 145: T1 or E1 show interfaces Output Fields (continued)
Level of OutputField DescriptionField Name
extensiveInformation related to the circuit emulation statistics.
• CE Tx—Number of transmitted packets and bytes (TDM to PSN flow).
• CE Rx—Number of received packets and bytes and forward bytes (PSN to
TDM flow).
• CE Rx Forwarded—Number of forwarded bytes.
• CE Strayed—Number of stray packets.
• CE Lost—Number of lost packets.
• CE Malformed—Number of malformed packets
• CE Misinserted—Number of misinserted packets.
• CE AIS dropped—Number of dropped bytes due to buffer overrun (PSN to
TDM).
• CE Dropped—Number of dropped packets during resynchronization
• CE Overrun Events—Number of overrun events.
• CE Underrun Events—Number of underrun events.
CE Info
Sample Output
show interfaces (T1, IMA Link)
user@host> show interfaces t1-1/0/0
IMA Link alarms : None
IMA Link defects : LIF, LODS
IMA Link state:
Line : Not synchronized
Near end : Rx: Unusable, Tx: Usable
Far end : Rx: Unusable, Tx: Usable
IMA link media: Seconds Count State
LIF 0 OK
LODS 0 OK
Err-ICP 0 OK
IV 0 OK
Rx-FC 0 OK
Tx-FC 0 OK
FE-Defects 0
FE-Rx-FC 0
FE-Tx-FC 0
Rx-ICP 0
Rx-Stuff 0
Tx-ICP 11
Tx-Stuff 0
Rx-SES 0
Rx-UAS 0
Rx-UUS 1
Tx-UUS 0
FE-Rx-SES 0
FE-Rx-UAS 0
FE-Rx-UUS 0
FE-Tx-UUS 0
Copyright © 2017, Juniper Networks, Inc.2518
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English