Juniper ACX2000

Table 158: show isis interface Output Fields (continued)
Level of OutputField DescriptionField Name
extensiveConfigured value of the hold timer.config holdtime
extensiveIf the state is not in sync and the hold time is not infinity, then this field displays
the remaining hold time in seconds.
remaining
extensiveConfigured value of IS-IS hello packetsIIH max size
Sample Output
show isis interface
user@host> show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric
at-2/3/0.0 3 0x1 Point to Point Point to Point 10/10
lo0.0 3 0x1 Passive Passive 0/0
show isis interface brief
The output for the show isis interface brief command is identical to that for the show isis
interface command. For sample output, see show isis interface on page 2696.
show isis interface detail
user@host> show isis interface detail
IS-IS interface database:
at-2/3/0.0
Index: 66, State: 0x6, Circuit id: 0x1, Circuit type: 3
LSP interval: 100 ms, CSNP interval: 5 s
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 1 64 10 9.000 27
2 1 64 10 9.000 27
lo0.0
Index: 64, State: 0x6, Circuit id: 0x1, Circuit type: 0
LSP interval: 100 ms, CSNP interval: disabled
Adjacency advertisement: Advertise
Protection Type: Node Link, No eligible Backup
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 0 64 0 Passive
2 0 64 0 Passive
show isis interface extensive
user@host> show isis interface extensive
IS-IS interface database:
xe-6/1/0.0
Index: 75, State: 0x6, Circuit id: 0x1, Circuit type: 2
LSP interval: 100 ms, CSNP interval: 10 s, Loose Hello padding, IIH max size:
1505
Adjacency advertisement: Advertise
Flood-group Area-ID: 49.0001
Copyright © 2017, Juniper Networks, Inc.2696
ACX Series Universal Access Router Configuration Guide