EasyManua.ls Logo

Juniper ACX2000

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 180: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field DescriptionField Name
If the MEP is a receiver for a one-way ETH-DM session: Number of valid 1DM frames received.
For all other cases, this field displays 0.
Valid 1DMs received
If the MEP is a receiver for a one-way ETH-DM session: Number of invalid 1DM frames received.
For all other cases, this field displays 0.
Invalid 1DMs received
If the MEP is a receiver for a one-way ETH-DM session: Number of out-of-sync one-way delay
measurement request packets received.
Out of sync 1DMs
received
If the MEP is an initiator for a two-way ETH-DM session: Number of Delay Measurement Message
(DMM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays 0.
DMMs sent
If the MEP is an initiator for a two-way ETH-DM session: Number of valid two-way delay measurement
packets received.
Valid DMMs received
If the MEP is an initiator for a two-way ETH-DM session: Number of invalid two-way delay measurement
packets received.
Invalid DMMs received
If the MEP is a responder for a ETH-DM session: Number of Delay Measurement Reply (DMR) frames
sent.
For all other cases, this field displays 0.
DMRs sent
If the MEP is an initiator for a two-way ETH-DM session: Number of valid DMRs received.
For all other cases, this field displays 0.
Valid DMRs received
If the MEP is an initiator for a two-way ETH-DM session: Number of invalid DMRs received.
For all other cases, this field displays 0.
Invalid DMRs received
Number of LBRs received that were valid messages and not in sequence.Valid out-of-order LBRs
received
Number of LBRs received that were corrupted.LBRs received with
corrupted data
Number of LBRs transmitted.LBRs sent
Linktrace messages (LTMs) transmitted.LTMs sent
Linktrace messages received.LTMs received
Linktrace responses (LTRs) transmitted.LTRs sent
Linktrace responses received.LTRs received
Copyright © 2017, Juniper Networks, Inc.2794
ACX Series Universal Access Router Configuration Guide

Table of Contents

Other manuals for Juniper ACX2000

Related product manuals