Juniper ACX2000 Configuration Guide

Tcam-slice represents the hardware TCAM block, where the TCAM lookup can happen
in parallel. Tcam-group represents the logical representation of one or more tcam-slices.
Sample Output
show pfe tcam errors
user@host> show pfe tcam errors
fw-vpls-in Resource-shortage[Entries:1, Counters:1, Policers:0]
show pfe tcam errors all-tcam-stages
user@host> show pfe tcam errors all-tcam-stages
fw-vpls-in Resource-shortage[Entries:1, Counters:1, Policers:0]
show pfe tcam errors all-tcam-stages detail
user@host> show pfe tcam errors all-tcam-stages detail
Tcam Resource Stage: Pre-Ingress
--------------------------------
No tcam usage
Tcam Resource Stage: Ingress
----------------------------
Group: 7, Mode: DOUBLE, Hw grps used: 2, Tcam apps: 2
Errors Resource-Shortage
Tcam-Entries 0 0
Counters 0 0
Policers 0 0
Group: 5, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Errors Resource-Shortage
Tcam-Entries 0 0
Counters 0 0
Policers 0 0
Group: 8, Mode: DOUBLE, Hw grps used: 4, Tcam apps: 1
Errors Resource-Shortage
Tcam-Entries 0 0
Counters 0 0
Policers 0 0
Group: 9, Mode: DOUBLE, Hw grps used: 0, Tcam apps: 1
Errors Resource-Shortage
Tcam-Entries 1 1
Counters 1 1
Policers 0 0
App error statistics:
----------------------
App-Name Entries Counters Policers Precedence State
Related-App-Name ..
-----------------------------------------------------------------
fw-vpls-in 1 1 0 2 FAILED
fw-semantics 0 X X 1 OK
Tcam Resource Stage: Egress
---------------------------
No tcam usage
2879Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English