Table 201: show ppp statistics Output Fields (continued)
Level of OutputField DescriptionField Name
detail• ML bundle settings—Multilink bundle settings. Stores the context information
for a MLPPP bundle.
• PPP LCP session—PPP Link Control Protocol session, used for establishing,
configuring, and testing the data-link connection. Stores the information for
an LCP session, such as negotiated options, current state, and statistics.
• PPP NCP session—PPP Network Control Protocol (NCP) phase in the PPP
link connection process. Stores the information for an NCP session, such as
negotiated options, current state, address family, and statistics.
• Physical interface—Stores the information about the physical interface that
PPP obtains from the kernel.
• Access profile—Stores the information found at the [edit access profile]
hierarchy level for each profile.
• ML wait entry—Created when there are MLPPP links joining a bundle. before
its addition to the PPP process. Links are saved here, and when the bundle
is added, are properly assigned to the bundle.
• Group profile—Stores information set in the PPP stanza of a group profile,
such as the primary and secondary Domain Name System (DNS), primary
and secondary NDNS, and address pool name.
• Profile client—Stores the per-client information of the access profile
(information obtained from the [set access profile name client client-name]
hierarchy level.
• PPP Auth session—PPP authentication session. Stores all the session-specific
authentication protocol parameters.
• Logical interface—Stores the information about the logical interface that PPP
obtains from the kernel.
• Non-tagged—Generic catch-all for allocations not of a particular structure
type.
Type (continued)
Copyright © 2017, Juniper Networks, Inc.2912
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
