Table 201: show ppp statistics Output Fields (continued)
Level of OutputField DescriptionField Name
detailType of structure for which memory is allocated.
• Queued rtsock msgs—Queued route socket messages. When a PPP process
is unable to send a route socket message to the kernel (typically because of
congestion of the route socket interface), the message is queued for deferred
processing.
• PPP session—Active PPP session. Stores all the information for a PPP session,
such as authentication, sequence number, LCP session, and NCP session
information.
• Interface address—Interface address associated with a PPP connection.
Stores the information about the interface address that PPP obtains from
the kernel.
• Destination profile—Stores the destination profile information associated
with an interface address.
• ML link settings—Stores information about an MLPPP link, such as the bundle
name and compressed real-time transport protocol (CRTP) settings.
• IPCP blocked address—When addresses are blocked in an address pool (for
example, when the interface address is within the range of an address pool,
it will be implicitly blocked), this structure is used to store the address in the
pool.
• PPP session trace—A PPP session trace is allocated for record keeping for
each session listed at the [set protocols ppp monitor-session] hierarchy level.
• IFL redundancy state—Stores redundancy state information needed for high
availability (HA) operation.
• Protocol family—Stores the information about the protocol family that PPP
obtains from the kernel.
Type
2911Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
