EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2982 background imageLoading...
Page #2982 background image
Table 204: show protection-group ethernet-ring node-state Output
Fields (continued)
Field DescriptionField Name
State of the Ethernet ring APS.
• idle—Indicates that the ring is working in normal condition and
there is no active or pending protection-switching request in the
ring. When the ring is in idle state, it is blocked at the RPL link.
• protected—Indicates that there is a protection switch on the ring
because of a signal failure condition on the ring link.
• MS—Indicates that the manual switch command is active in the
ring.
• FS—Indicates that the forced switch command is active in the
ring.
• pending—Indicates that the ring is in pending state.
APS State
Events on the ring.
• NR-RB—Indicates that there is no APS request and the ring link is
blocked on the ring owner node.
• NR—Indicates that there is no APS request pending in the ring.
• local SF—Indicates that there is signal failure on one or both of
the ring links of the node.
• remote SF—Indicates that there is signal failure on one or more
ring links of any other node of the ring.
• local FS—Indicates that there is a forced switched command
active on one or both of the ring links of the node.
• remote FS—Indicates that there is a forced switch command active
on one or more ring links of any other node of the ring.
• local MS—Indicates that there is a manual switch command active
on one of the ring links of the node.
• remote MS—Indicates that there is a manual switch command
active on one or more ring links of any other node of the ring.
• WTR running—Indicates that the wait to restore timer is running
on the RPL owner.
• WTB running—Indicates that the wait to block timer is running on
the RPL owner.
Event
Whether this node is the ring owner: Yes or No.RPL Owner / Ring
Protection Link Owner
Restoration timer: running or disabled.WTR Timer / Restore Timer
Wait to block timer: running or disabled.WTB Timer / Wait to block
timer
Wait to block interval.Wait to block timer (WTB
Timer)
Guard timer: running or disabled.Guard Timer
Copyright © 2017, Juniper Networks, Inc.2924
ACX Series Universal Access Router Configuration Guide

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals