Juniper ACX2000

Table 204: show protection-group ethernet-ring node-state Output
Fields (continued)
Field DescriptionField Name
State of the node: Operational or any internal wait state..Op State / Operational
State
Sample Output
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node, Normal Operation)
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State Event RPL Owner WTR Timer WTB Timer Guard
Timer Operation state
pg101 idle NR-RB Yes disabled disabled disabled
operational
pg102 idle NR-RB No disabled disabled disabled
operational
show protection-group ethernet-ring node-state (MX Series Router - Normal Ring Node, Normal Operation)
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State Event RPL Owner
pg102 idle NR-RB No
WTR Timer WTB Timer Guard Timer Operation state
disabled disabled disabled operational
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node, Remote Failure Condition)
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State Event RPL Owner
pg101 protected remote SF Yes
WTR Timer WTB Timer Guard Timer Operation state
disabled disabled disabled operational
show protection-group ethernet-ring node-state detail (ACX Series and MX Series Router)
user@host> show protection-group ethernet-ring node-state detail
Ethernet-Ring name : Erp_1
APS State : idle
Event : NR-RB
Ring Protection Link Owner : No
Wait to Restore Timer : disabled
Wait to Block Timer : disabled
Guard Timer : disabled
Operation state : operational
show protection-group ethernet-ring node-state detail (MX Series Router - RPL Owner Node, Normal Operation)
user@host> show protection-group ethernet-ring node-state detail
Ethernet-Ring name : pg101
APS State : idle
Event : NR-RB
Ring Protection Link Owner : Yes
2925Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands