Juniper ACX2000 Configuration Guide

Table 214: show route advertising-protocol Output Fields (continued)
Level of OutputField DescriptionField Name
All levelsNext hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
If the next-hop advertisement to the peer is Self, and the RIB-out next hop is a
specific IP address, the RIB-out IP address is included in the extensive output.
See show route advertising-protocol bgp extensive all (Next Hop Self with RIB-out
IP Address) on page 2981.
Nexthop
briefMultiple exit discriminator value included in the route.MED
All levelsLocal preference value included in the route.Lclpref or Localpref
All levels except briefWhen BGP route prioritization is enabled and a route is present in a priority
queue, this shows which priority queue the route is in.
Queued
All levelsAS path through which the route was learned. The letters at the end of the AS
path indicate the path origin, providing an indication of the state of the route at
the point at which the AS path originated:
• I—IGP.
• E—EGP.
• ?—Incomplete; typically, the AS path was aggregated.
When AS path numbers are included in the route, the format is as follows:
• [ ]—Brackets enclose the local AS number associated with the AS path if
configured on the router, or if AS path prepending is configured.
• { }—Braces enclose AS sets, which are groups of AS numbers in which the
order does not matter. A set commonly results from route aggregation. The
numbers in each AS set are displayed in ascending order.
• ( )—Parentheses enclose a confederation.
• ( [ ] )—Parentheses and brackets enclose a confederation set.
NOTE: In Junos OS Release 10.3 and later, the AS path field displays an
unrecognized attribute and associated hexadecimal value if BGP receives
attribute 128 (attribute set) and you have not configured an independent domain
in any routing instance.
AS path
detail extensiveStack of labels carried in the BGP route update.Route Labels
detail extensive(For route reflected output only) Cluster ID sent by the route reflector.Cluster list
detail extensive(For route reflected output only) Address of routing device that originally sent
the route to the route reflector.
Originator ID
detail extensiveCommunity path attribute for the route. See the output field table for the show
route detail command for all possible values for this field.
Communities
detail extensiveAccumulated interior gateway protocol (AIGP) BGP attribute.AIGP
2979Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English