To Next Page

To Previous Page

Table 216: show route detail Output Fields (continued)

Field DescriptionField Name

First label in a block of labels and label block size. A remote PE routing device uses this first label

when sending traffic toward the advertising PE routing device.

Label-Base, range

Layer 2 VPN and VPLS network layer reachability information (NLRI).status vector

Current active path when BGP multipath is configured.Accepted Multipath

The LongLivedStale flag indicates that the route was marked LLGR-stale by this router, as part of the

operation of LLGR receiver mode. Either this flag or the LongLivedStaleImport flag may be displayed

for a route. Neither of these flags are displayed at the same time as the Stale (ordinary GR stale) flag.

Accepted

LongLivedStale

The LongLivedStaleImport flag indicates that the route was marked LLGR-stale when it was received

from a peer, or by import policy. Either this flag or the LongLivedStale flag may be displayed for a

route. Neither of these flags are displayed at the same time as the Stale (ordinary GR stale) flag.

Accept all received BGP long-lived graceful restart (LLGR) and LLGR stale routes learned from

configured neighbors and import into the inet.0 routing table

Accepted

LongLivedStaleImport

Accept all received BGP long-lived graceful restart (LLGR) and LLGR stale routes learned from

configured neighbors and imported into the inet.0 routing table

The LongLivedStaleImport flag indicates that the route was marked LLGR-stale when it was received

from a peer, or by import policy.

ImportAccepted

LongLivedStaleImport

Path currently contributing to BGP multipath.Accepted

MultipathContrib

Local preference value included in the route.Localpref

BGP router ID as advertised by the neighbor in the open message.Router ID

In a routing table group, the name of the primary routing table in which the route resides.Primary Routing Table

In a routing table group, the name of one or more secondary tables in which the route resides.Secondary Tables

Table 217 on page 3006 describes all possible values for the Next-hop Types output field.

Table 217: Next-hop Types Output Field Values

DescriptionNext-Hop Type

Broadcast next hop.Broadcast (bcast)

Deny next hop.Deny

Discard next hop.Discard

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000