private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
show route output address extensive
The output for the show route output address extensive command is identical to that of
the show route output address detail command. For sample output, see show route
output address detail on page 3089.
show route output address terse
user@host> show route output address 172.16.36.1 terse
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
* 172.16.36.0/24 D 0 >so-0/1/2.0
O 10 1 >so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
show route output interface
user@host> show route output interface so-0/1/2.0
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.71.240/32 *[OSPF/10] 00:13:00, metric 2
via so-0/1/2.0
> via so-0/3/2.0
10.255.71.241/32 *[OSPF/10] 00:13:10, metric 1
> via so-0/1/2.0
172.16.14.0/24 *[OSPF/10] 00:05:11, metric 3
to 35.1.1.2 via ge-3/1/0.0
> via so-0/1/2.0
via so-0/3/2.0
172.16.16.0/24 *[OSPF/10] 00:13:10, metric 2
> via so-0/1/2.0
172.16.36.0/24 *[Direct/0] 00:13:21
> via so-0/1/2.0
[OSPF/10] 00:13:20, metric 1
> via so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
Copyright © 2017, Juniper Networks, Inc.3090
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
