Juniper ACX2000 Configuration Guide

inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
show route output interface detail
user@host> show route output interface so-0/1/2.0 detail
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
10.255.71.240/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 2
Next hop: via so-0/1/2.0
Next hop: via so-0/3/2.0, selected
State: <Active Int>
Age: 14:52 Metric: 2
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
10.255.71.241/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 4
Next hop: via so-0/1/2.0, selected
State: <Active Int>
Age: 15:02 Metric: 1
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
...
show route output interface extensive
The output for the show route output interface extensive command is identical to that of
the show route output interface detail command. For sample output, see show route
output interface detail on page 3091.
show route output interface terse
user@host> show route output interface so-0/1/2.0 terse
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
* 10.255.71.240/32 O 10 2 so-0/1/2.0
>so-0/3/2.0
* 10.255.71.241/32 O 10 1 >so-0/1/2.0
* 172.16.14.0/24 O 10 3 35.1.1.2
>so-0/1/2.0
so-0/3/2.0
* 172.16.16.0/24 O 10 2 >so-0/1/2.0
* 172.16.36.0/24 D 0 >so-0/1/2.0
O 10 1 >so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
3091Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English