show route table VPN_blue.mvpn-inet6.0
user@host> show route table VPN_blue.mvpn-inet6.0
vpn_blue.mvpn-inet6.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
1:10.255.2.202:65536:10.255.2.202/432
*[BGP/170] 00:02:37, localpref 100, from 10.255.2.202
AS path: I
> via so-0/1/3.0
1:10.255.2.203:65536:10.255.2.203/432
*[BGP/170] 00:02:37, localpref 100, from 10.255.2.203
AS path: I
> via so-0/1/0.0
1:10.255.2.204:65536:10.255.2.204/432
*[MVPN/70] 00:57:23, metric2 1
Indirect
5:10.255.2.202:65536:128:::192.168.90.2:128:ffff::1/432
*[BGP/170] 00:02:37, localpref 100, from 10.255.2.202
AS path: I
> via so-0/1/3.0
6:10.255.2.203:65536:64500:128:::10.12.53.12:128:ffff::1/432
*[PIM/105] 00:02:37
Multicast (IPv6)
7:10.255.2.202:65536:64500:128:::192.168.90.2:128:ffff::1/432
*[MVPN/70] 00:02:37, metric2 1
Indirect
show route table vrf1.mvpn.0 extensive
user@host> show route table vrf1.mvpn.0 extensive
1:10.255.50.77:1:10.255.50.77/240 (1 entry, 1 announced)
*MVPN Preference: 70
PMSI: Flags 0x0: Label 0: RSVP-TE:
Session_13[10.255.50.77:0:25624:10.255.50.77]
Next hop type: Indirect
Address: 0xbb2c944
Next-hop reference count: 360
Protocol next hop: 10.255.50.77
Indirect next hop: 0x0 - INH Session ID: 0x0
State: <Active Int Ext>
Age: 53:03 Metric2: 1
Validation State: unverified
Task: mvpn global task
Announcement bits (3): 0-PIM.vrf1 1-mvpn global task 2-rt-export
AS path: I
show route table inetflow detail
user@host> show route table inetflow detail
inetflow.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
10.12.44.1,*/48 (1 entry, 1 announced)
*BGP Preference: 170/-101
Next-hop reference count: 2
State: <Active Ext>
Local AS: 64502 Peer AS: 64500
Age: 4
Task: BGP_64500.10.12.99.5+3792
Announcement bits (1): 0-Flow
Copyright © 2017, Juniper Networks, Inc.3146
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
