Juniper ACX2000 Configuration Guide

AS path: 64500 I
Communities: traffic-rate:0:0
Validation state: Accept, Originator: 10.12.99.5
Via: 10.12.44.0/24, Active
Localpref: 100
Router ID: 10.255.71.161
10.12.56.1,*/48 (1 entry, 1 announced)
*Flow Preference: 5
Next-hop reference count: 2
State: <Active>
Local AS: 64502
Age: 6:30
Task: RT Flow
Announcement bits (2): 0-Flow 1-BGP.0.0.0.0+179
AS path: I
Communities: 1:1
user@host> show route table green.l2vpn.0 (VPLS Multihoming with FEC 129)
green.l2vpn.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.1.1.2:100:10.1.1.2/96 AD
*[VPLS/170] 1d 03:11:03, metric2 1
Indirect
10.1.1.4:100:10.1.1.4/96 AD
*[BGP/170] 1d 03:11:02, localpref 100, from 10.1.1.4
AS path: I, validation-state: unverified
> via ge-1/2/1.5
10.1.1.2:100:1:0/96 MH
*[VPLS/170] 1d 03:11:03, metric2 1
Indirect
10.1.1.4:100:1:0/96 MH
*[BGP/170] 1d 03:11:02, localpref 100, from 10.1.1.4
AS path: I, validation-state: unverified
> via ge-1/2/1.5
10.1.1.4:NoCtrlWord:5:100:100:10.1.1.2:10.1.1.4/176
*[VPLS/7] 1d 03:11:02, metric2 1
> via ge-1/2/1.5
10.1.1.4:NoCtrlWord:5:100:100:10.1.1.4:10.1.1.2/176
*[LDP/9] 1d 03:11:02
Discard
user@host> show route table red extensive
red.inet.0: 364481 destinations, 714087 routes (364480 active, 48448 holddown, 1
hidden)
10.0.0.0/32 (3 entries, 1 announced)
State: <OnList CalcForwarding>
TSI:
KRT in-kernel 10.0.0.0/32 -> {composite(1048575)} Page 0 idx 1 Type 1 val 0x934342c
Nexthop: Self
AS path: [2] I
Communities: target:2:1
Path 10.0.0.0 from 10.3.0.0 Vector len 4. Val: 1
@BGP Preference: 170/-1
Route Distinguisher: 2:1
Next hop type: Indirect
Address: 0x258059e4
Next-hop reference count: 2
3147Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English