Juniper ACX2000 Configuration Guide

Result of the iteration runs : Frame-loss test complete for packet size 64
Frame-loss rate (percent) : 0.00 %
Test packet size: 1280
Iteration Duration Elapsed Offered pps Tx Rx Tx Rx
Frame-loss
(sec) time throughput% Packets Packets Bytes Bytes
rate %
1 3 3 10.00 % 9489 404754 28467 36551628
36551628 0.00 %
2 20 20 100.00 % 94896 1897920 1897920 2436929280
2436929280 0.00 %
3 20 20 100.00 % 94896 1897920 1897920 2436929280
2436929280 0.00 %
4 20 20 100.00 % 94896 1897920 1897920 2436929280
2436929280 0.00 %
Result of the iteration runs : Frame-loss test complete for packet size 1280
Frame-loss rate (percent) : 0.00 %
RFC2544 Frame-loss test results summary:
----------------------------------------
Packet Theoretical Percentage Tx Rx Frame
Loss
Size rate (pps) throughput Packets Packets rate
percent
64 1349184 100.00 % 26983501 26983501 0.00
%
1280 94896 100.00 % 1897920 1897920 0.00
%
show services rpm rfc2544-benchmarking test-id detail (Back-to-Back Frames Test on ACX Series Routers)
user@host> show services rpm rfc2544-benchmarking test-id 55 detail
Test information :
Test id: 55, Test name: test1, Test type: Back-Back-Frames
Test mode: Initiate-and-Terminate
Test packet size: 64 1280
Test state: RFC2544_TEST_STATE_COMPLETED
Test start time: 2005-07-29 10:36:54 UTC
Test finish time: 2005-07-29 10:37:57 UTC
Counters last cleared: Never
Test-profile Configuration:
Test-profile name: prof_b2b
Test packet size: 64 1280
Therotical max bandwidth : 993000 kbps
Test Configuration:
Test mode: Initiate-and-Terminate
Duration in seconds: 20
Test family: INET
Routing Instance Name: default
Copyright © 2017, Juniper Networks, Inc.3174
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English