Description Display the hostname and version information about the software running on the router
or switch.
Beginning in Junos OS Release 13.3, the show version command output includes the Junos
field that displays the Junos OS version running on the device. This field provides a
consistent means of identifying the Junos OS version, rather than extracting that
information from the list of installed sub-packages.
Options none—Display standard information about the hostname and version of the software
running on the router or switch.
brief | detail—(Optional) Display the specified level of output.
all-members—(EX4200 switches and MX Series routers only) (Optional) Display standard
information about the hostname and version of the software running on all members
of the Virtual Chassis configuration.
component all—(QFabric systems only) (Optional) Display the host name and version
information about the software running on all the components on the QFabric system.
component component-name—(QFabric systems only) (Optional) Display the host
name and version information about the software running on a specific QFabric
system component. Replace component-name with the name of the QFabric system
component. The component-name can be the name of a diagnostics Routing Engine,
Director group, fabric control Routing Engine, fabric manager Routing Engine,
Interconnect device, or Node group.
local—(EX4200 switches and MX Series routers only) (Optional) Display standard
information about the hostname and version of the software running on the local
Virtual Chassis member.
member member-id—(EX4200 switches and MX Series routers only) (Optional) Display
standard information about the hostname and version of the software running on
the specified member of the Virtual Chassis configuration. For EX4200 switches,
replace member-id with a value from 0 through 9. For an MX Series Virtual Chassis,
replace member-id with a value of 0 or 1.
scc—(TX Matrix routers only) (Optional) Display the hostname and version information
about the software running on the TX Matrix router (or switch-card chassis).
lcc number—(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX
Matrix router, display the host name and version information about the software
running on for a specified T640 router (line-card chassis or LCC) that is connected
to the TX Matrix router. On a TX Matrix Plus router, display the host name and version
information about the software running for a specified T1600 or T4000 router (LCC)
that is connected to the TX Matrix Plus router.
Copyright © 2017, Juniper Networks, Inc.3194
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
