Juniper ACX2000

Buffering exceptions:
Packet data buffer overflow 0
Fragment data buffer overflow 0
Assembly exceptions:
Fragment timeout 0
Missing sequence number 0
Out-of-order sequence number 0
Out-of-range sequence number 0
Hardware errors (sticky):
Data memory error 0
Control memory error 0
Logical interface lsq-1/1/0.0 (Index 326) (SNMP ifIndex 599) (Generation 177)
Flags: Up Point-To-Point SNMP-Traps 0x0 Encapsulation: Multilink-PPP
Last flapped: 2015-06-24 23:57:34 PDT (00:00:51 ago)
Bandwidth: 6144kbps
Bundle links information:
Active bundle links 4
Removed bundle links 0
Disabled bundle links 0
Bundle options:
MRRU 2000
Remote MRRU 2000
Drop timer period 0
Inner PPP Protocol field compression enabled
Sequence number format short (12 bits)
Fragmentation threshold 450
Links needed to sustain bundle 3
Multilink classes 4
Link layer overhead 4.0 %
Bundle status:
Received sequence number 0x0
Transmit sequence number 0x0
Packet drops 0 (0 bytes)
Fragment drops 0 (0 bytes)
MRRU exceeded 0
Fragment timeout 0
Missing sequence number 0
Out-of-order sequence number 0
Out-of-range sequence number 0
Packet data buffer overflow 0
Fragment data buffer overflow 0
Statistics Frames fps Bytes bps
Bundle:
Multilink:
Input : 1076 256 484200 921600
Output: 1061 256 477450 921600
Network:
Input : 2182 256 201812 208896
Output: 2168 256 192029 174080
IPV6 Transit Statistics Packets Bytes
Network:
Input : 0 0
Output: 0 0
Multilink class 0:
Multilink:
Input : 1075 256 483750 921600
Output: 1061 256 477450 921600
Network:
Input : 1061 256 477450 921600
511Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Configuring MLPPP